查看完整版本: CIM版本更新: 跨入CIM 11时代

CIM版本更新: 跨入CIM 11时代

如下是CIM 11 V00的发布说明，其中ERCOT是电力可靠性委员会(Electric Reliability Council of Texas)的英文缩写。

This CIM 11 V00 is the release that has been selected as the baseline for the ERCOT Nodal project.  As such, this release will be distributed to all ERCOT Nodal vendors and Transmission Service Providers that may wish to receive ERCOT CIM/XML files.

These CIM/ XML files will be produced based on the CIM 11 V00 release but will also include the ERCOT extensions required to exchange full model files that will include the network data (beyond the CPSM) and much of the SCADA and Generation data that is required to operate the ERCOT Grid.  Once we have the full ERCOT extensions completed, we plan to post that model as well.

Finally, ERCOT has submitted all it’s extensions to IEC Working Group 13 and requested that consideration be given for inclusion into the standard.  We understand than some of these extensions are unique to the ERCOT Nodal project and would not be appropriate for the standard.  However, any extensions that are not truly unique to ERCOT should be considered for inclusion into the standard.

61970cim11v01_61968CIM8_20070125.zip已经发了，比你的新一点。
见：[url]http://www.zgepsa.com/thread-22540-1-2.html[/url]

[[i] 本帖最后由 duyan 于 2007-4-7 23:27 编辑 [/i]]

不好意思，能给讲讲什么是CIM吗，不是计算机集成制造系统吧《扫一下盲啊

谢谢分享！

就出CIM11了?
不是只有CIM10的吗?

11已经出来了，但是官方还没有发布

CIM11v09最近颁布了。

什么是CIM啊？

回复

东西是好东西，只可惜需要付费，权限太高了

CIM11的正式版本不知道什么时候发布啊，CIM10都出来好几年了

呵呵，下载了

谢谢